Omit BeadChips and Stripes from a Scan
This snippet causes dropdowns to open on page load. This text/paragraph does not appear in the output.
You can omit BeadChips from a scan. You can also omit individual stripes within a BeadChip, unless you are using Laboratory Information Management System (LIMS). All sections of a BeadChip must be scanned when using LIMS.
Omit BeadChip Stripes from a Scan
|
1.
|
On the iScan Control Software Setup screen, the BeadChip preview area is on the left side of the screen. At the top of the BeadChip preview area, select a BeadChip to change the scan settings. |
|
2.
|
In the selected part of the BeadChip Preview area, select individual stripes on the BeadChip to deselect them. To omit multiple stripes at once, click and drag. |
Deselected stripes change color from light blue to dark gray.
|
3.
|
When you have scanned the BeadChips and selected Scan in the iScan Control Software (for instructions, refer to Load and Scan BeadChips), a confirmation dialog box informs you that some sections are omitted from the scan. If any stripe within a sample on the BeadChip is deselected, intensity data (*.idat files) are not saved for that sample. |
