Instrument Control Computer
The instrument is shipped with an instrument control computer that is customized to the latest system requirements. Contact Illumina Technical Support for more information about the computer specifications.
The instrument control computer is a dedicated subsystem of the instrument and is not intended for use or supported as a general purpose computer. Loading and using third party software can result in slow processing, loss of data, or invalid data.
NOTE
Only install third party software if recommended by Illumina personnel.
Data Connections
The instrument includes the following connections to the instrument control computer.
|
Quantity |
Description |
|---|---|
|
1 |
USB connection for communication between the instrument and the computer. A standard USB type A to type B style connector is used. |
|
1 |
Low voltage differential signaling (LVDS) CameraLink connection for the camera. CameraLink cable varies depending on the FrameGrabber firmware installed. The camera transfers raw data from the instrument to the computer. |
|
1 |
Ethernet connection to the Smart Camera used for focusing. A standard 100 Mb/s ethernet cable is used. |
Antivirus Software
Antivirus software is highly recommended to protect the instrument control computer against viruses. For details on configuring antivirus software, refer to Illumina Control Computer Security and Networking.
