Load the Reagent Cartridge

Remove the used reagent cartridge from the reagent compartment. Dispose of unused contents in accordance with applicable standards.

This set of reagents contains potentially hazardous chemicals. Personal injury can occur through inhalation, ingestion, skin contact, and eye contact. Ventilation should be appropriate for handling of hazardous materials in reagents. Wear protective equipment, including eye protection, gloves, and laboratory coat appropriate for risk of exposure. Handle used reagents as chemical waste and discard in accordance with applicable regional, national, and local laws and regulations. For additional environmental, health, and safety information, refer to the SDS at support.illumina.com/sds.html.

To facilitate safe disposal of unused reagent, the reservoir in position 6 is removable. For more information, see Remove Used Reservoir from Position #6.

Slide the reagent cartridge into the reagent compartment until the cartridge stops, and then close the reagent compartment door.

Load Reagent Cartridge

Select Load.

The software moves the cartridge into position automatically (~30 seconds), the reagent cartridge ID appears on the screen, and the sensors are checked.

Select Next.