Product Compliance and Regulatory Markings

Illumina, Inc. hereby declares that the NovaSeq X Series is in compliance with the following Directives:

•

EMC Directive [2014/30/EU]

•

Low Voltage Directive [2014/35/EU]

•

RED Directive [2014/53/EU]

Illumina, Inc. hereby declares that the Compute Server is in compliance with the following Directives:

•

RoHS Directive [2011/65/EU] as amended by EU 2015/863

The full text of the EU Declaration of Conformity is available at the following internet address: support.illumina.com/certificates.html.

This label indicates that the instrument meets the Waste Electrical and Electronic Equipment (WEEE) Directive for waste. Visit support.illumina.com/weee-recycling.html for guidance on recycling your equipment.

This equipment complies with maximum permissible exposure (MPE) limits for the general population per Title 47 CFR § 1.1310 Table 1.

This equipment complies with the limitation of human exposure to electromagnetic fields (EMFs) for devices operating within the frequency range 0 Hz to 10 GHz, used in radio frequency identification (RFID) in an occupational or professional environment. (EN 50364:2010 sections 4.0.)

For information on RFID compliance, refer to the RFID Reader Compliance Guide (document # 1000000002699).

This equipment has been designed and tested to the CISPR 11 Class A standard. In a domestic environment, it might cause radio interference. If radio interference occurs, you might need to mitigate it.

Do not use the device in close proximity to sources of strong electromagnetic radiation, which can interfere with proper operation.