Control Computer Connections
The control computer has two network interface connections. One is designed for external network communication. The other is designed for internal system communication only. Do not disable the internal communication connection.
The system acquires an IP address from the host network via Dynamic Host Configuration Protocol (DHCP) by default. Alternatively, you can choose a static address from Windows network settings.
Outbound Connections
The following table provides the outbound network ports of the control computer. The MAC address, which provides network access for Ethernet, is instrument-specific and cannot be provided before instrument shipment.
|
Port |
Purpose |
|---|---|
|
80 |
BaseSpace Sequence Hub, Local Run Manager, or Instrument Performance Data |
|
443 |
BaseSpace Sequence Hub or Instrument Performance Data |
|
8080 |
Software updates |
Regional Platform Domains
For the regional platform domains that provide access from Universal Copy Service to BaseSpace Sequence Hub and Illumina Proactive, refer to Illumina Instrument Control Computer Security and Networking. Note that this applies to instruments running in RUO mode only.
