Electrical Considerations

Onsite Server Power Specifications

Power

Specification

Input voltage

100–240 Volts AC @ 47–63 Hz

Power consumption

525 watts

VeriSeq NIPT Microlab STAR Power Specifications

Power

Specification

Input voltage

100–240 Volts AC @ 50–60 Hz

Power consumption

600 Watts

Your facility must be wired with the following receptacles.

Voltage

Specifications

100–120 Volts AC
• Two 15 amp grounded, dedicated lines with proper voltage and electrical ground are required.
• North America and Japan—Receptacle: NEMA 5-15

220–240 Volts AC
• Two 10 amp grounded lines with proper voltage and electrical ground are required.
• If the voltage fluctuates more than 10%, power line regulators are required.

The instrument has a connection to protective earth through the enclosure. The safety ground on the power cord returns protective earth to a safe reference. The protective earth connection on the power cord must be in good working condition when using this device.

The Onsite Server has international standard IEC 60320 C13 receptacles and is shipped with two region-specific power cords.

Hazardous voltages are removed from the server only when the power cords are disconnected from the AC power source.

To obtain equivalent receptacles or power cords that comply with local standards, consult a third-party supplier such as Interpower Corporation (www.interpower.com).

Never use an extension cord to connect the server to a power supply.

The Onsite Server contains no user-replaceable fuses.