iSeq 100 i1 Reagent
Performing a run on the iSeq 100 requires iSeq 100 i1 Reagent kits, a single-use reagent kit. The kit is available in one size (300-cycle) and three bundles:
| • | Single—Provides consumables for one run. |
| • | Four-pack—Provides consumables for four runs. |
| • | Eight-pack—Provides consumables for eight runs. |
Software Compatibility
Before thawing reagents and setting up a run, make sure the system is upgraded to the software version compatible with your kit. For upgrade instructions, refer to Software Updates.
|
Kit |
Compatible Software |
|---|---|
|
iSeq 100 i1 Reagent v2 kits |
iSeq 100 Control Software v2.0, or later |
Supported Number of Cycles
The 300-cycle label on the cartridge indicates how many cycles are analyzed, not how many cycles are performed. Thus, the cartridge provides sufficient reagents for up to 322 cycles of sequencing.
The 322 cycles include 151 cycles each for Read 1 and Read 2, plus up to 10 cycles each for Index 1 and Index 2. For information on how many cycles to sequence, refer to Recommended Number of Cycles.
The flow cell is compatible with any number of cycles and any read type.
Symbol Descriptions
The following table describes the symbols on the consumable or consumable packaging.
|
Symbol |
Description |
|---|---|
|
|
Indicates which side to face up in storage. |
|
|
The date the consumable expires. For best results, use the consumable before this date. |
|
|
Indicates the manufacturer (Illumina). |
|
|
The date when the consumable was manufactured. |
|
|
The intended use is Research Use Only (RUO). |
|
|
Indicates the part number so that the consumable can be identified. |
|
|
Indicates the batch code to identify the batch or lot that the consumable was manufactured in. |
|
|
Indicates that caution is necessary. |
|
|
Indicates a health hazard. |
|
|
Storage temperature range in degrees Celsius. Store the consumable within the indicated range. |
